Move webrtc/{base => rtc_base}

webrtc/base/timestampaligner.cc

Index: webrtc/base/timestampaligner.cc
diff --git a/webrtc/base/timestampaligner.cc b/webrtc/base/timestampaligner.cc
deleted file mode 100644
index 281da8f862c115273153c2b673de312b63166270..0000000000000000000000000000000000000000
--- a/webrtc/base/timestampaligner.cc
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- *  Copyright (c) 2016 The WebRTC project authors. All Rights Reserved.
- *
- *  Use of this source code is governed by a BSD-style license
- *  that can be found in the LICENSE file in the root of the source
- *  tree. An additional intellectual property rights grant can be found
- *  in the file PATENTS.  All contributing project authors may
- *  be found in the AUTHORS file in the root of the source tree.
- */
-
-#include <limits>
-
-#include "webrtc/base/checks.h"
-#include "webrtc/base/logging.h"
-#include "webrtc/base/timestampaligner.h"
-#include "webrtc/base/timeutils.h"
-
-namespace rtc {
-
-TimestampAligner::TimestampAligner()
-    : frames_seen_(0),
-      offset_us_(0),
-      clip_bias_us_(0),
-      prev_translated_time_us_(std::numeric_limits<int64_t>::min()) {}
-
-TimestampAligner::~TimestampAligner() {}
-
-int64_t TimestampAligner::TranslateTimestamp(int64_t camera_time_us,
-                                             int64_t system_time_us) {
-  return ClipTimestamp(
-      camera_time_us + UpdateOffset(camera_time_us, system_time_us),
-      system_time_us);
-}
-
-int64_t TimestampAligner::UpdateOffset(int64_t camera_time_us,
-                                       int64_t system_time_us) {
-  // Estimate the offset between system monotonic time and the capture
-  // time from the camera. The camera is assumed to provide more
-  // accurate timestamps than we get from the system time. But the
-  // camera may use its own free-running clock with a large offset and
-  // a small drift compared to the system clock. So the model is
-  // basically
-  //
-  //   y_k = c_0 + c_1 * x_k + v_k
-  //
-  // where x_k is the camera timestamp, believed to be accurate in its
-  // own scale. y_k is our reading of the system clock. v_k is the
-  // measurement noise, i.e., the delay from frame capture until the
-  // system clock was read.
-  //
-  // It's possible to do (weighted) least-squares estimation of both
-  // c_0 and c_1. Then we get the constants as c_1 = Cov(x,y) /
-  // Var(x), and c_0 = mean(y) - c_1 * mean(x). Substituting this c_0,
-  // we can rearrange the model as
-  //
-  //   y_k = mean(y) + (x_k - mean(x)) + (c_1 - 1) * (x_k - mean(x)) + v_k
-  //
-  // Now if we use a weighted average which gradually forgets old
-  // values, x_k - mean(x) is bounded, of the same order as the time
-  // constant (and close to constant for a steady frame rate). In
-  // addition, the frequency error |c_1 - 1| should be small. Cameras
-  // with a frequency error up to 3000 ppm (3 ms drift per second)
-  // have been observed, but frequency errors below 100 ppm could be
-  // expected of any cheap crystal.
-  //
-  // Bottom line is that we ignore the c_1 term, and use only the estimator
-  //
-  //    x_k + mean(y-x)
-  //
-  // where mean is plain averaging for initial samples, followed by
-  // exponential averaging.
-
-  // The input for averaging, y_k - x_k in the above notation.
-  int64_t diff_us = system_time_us - camera_time_us;
-  // The deviation from the current average.
-  int64_t error_us = diff_us - offset_us_;
-
-  // If the current difference is far from the currently estimated
-  // offset, the filter is reset. This could happen, e.g., if the
-  // camera clock is reset, or cameras are plugged in and out, or if
-  // the application process is temporarily suspended. Expected to
-  // happen for the very first timestamp (|frames_seen_| = 0). The
-  // threshold of 300 ms should make this unlikely in normal
-  // operation, and at the same time, converging gradually rather than
-  // resetting the filter should be tolerable for jumps in camera time
-  // below this threshold.
-  static const int64_t kResetThresholdUs = 300000;
-  if (std::abs(error_us) > kResetThresholdUs) {
-    LOG(LS_INFO) << "Resetting timestamp translation after averaging "
-                 << frames_seen_ << " frames. Old offset: " << offset_us_
-                 << ", new offset: " << diff_us;
-    frames_seen_ = 0;
-    clip_bias_us_ = 0;
-  }
-
-  static const int kWindowSize = 100;
-  if (frames_seen_ < kWindowSize) {
-    ++frames_seen_;
-  }
-  offset_us_ += error_us / frames_seen_;
-  return offset_us_;
-}
-
-int64_t TimestampAligner::ClipTimestamp(int64_t filtered_time_us,
-                                        int64_t system_time_us) {
-  const int64_t kMinFrameIntervalUs = rtc::kNumMicrosecsPerMillisec;
-  // Clip to make sure we don't produce timestamps in the future.
-  int64_t time_us = filtered_time_us - clip_bias_us_;
-  if (time_us > system_time_us) {
-    clip_bias_us_ += time_us - system_time_us;
-    time_us = system_time_us;
-  }
-  // Make timestamps monotonic, with a minimum inter-frame interval of 1 ms.
-  else if (time_us < prev_translated_time_us_ + kMinFrameIntervalUs) {
-    time_us = prev_translated_time_us_ + kMinFrameIntervalUs;
-    if (time_us > system_time_us) {
-      // In the anomalous case that this function is called with values of
-      // |system_time_us| less than |kMinFrameIntervalUs| apart, we may output
-      // timestamps with with too short inter-frame interval. We may even return
-      // duplicate timestamps in case this function is called several times with
-      // exactly the same |system_time_us|.
-      LOG(LS_WARNING) << "too short translated timestamp interval: "
-                      << "system time (us) = " << system_time_us
-                      << ", interval (us) = "
-                      << system_time_us - prev_translated_time_us_;
-      time_us = system_time_us;
-    }
-  }
-  RTC_DCHECK_GE(time_us, prev_translated_time_us_);
-  RTC_DCHECK_LE(time_us, system_time_us);
-  prev_translated_time_us_ = time_us;
-  return time_us;
-}
-
-}  // namespace rtc