Updating OpenH264 to v1.7.0

modules/video_coding/codecs/test/videoprocessor_integrationtest_libvpx.cc

 /*
  *  Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
  *
  *  Use of this source code is governed by a BSD-style license
  *  that can be found in the LICENSE file in the root of the source
  *  tree. An additional intellectual property rights grant can be found
  *  in the file PATENTS.  All contributing project authors may
  *  be found in the AUTHORS file in the root of the source tree.
  */
 
@@ skipping 51 matching lines @@
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 20, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(37.0, 36.0, 0.93, 0.92);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP9: Run with 5% packet loss and fixed bitrate. Quality should be a bit
 // lower. One key frame (first frame only) in sequence.
 TEST_F(VideoProcessorIntegrationTestLibvpx, Process5PercentPacketLossVP9) {
   config_.networking_config.packet_loss_probability = 0.05f;
   SetCodecSettings(&config_, kVideoCodecVP9, 1, false, false, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 20, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(17.0, 14.0, 0.45, 0.36);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP9: Run with no packet loss, with varying bitrate (3 rate updates):
 // low to high to medium. Check that quality and encoder response to the new
 // target rate/per-frame bandwidth (for each rate update) is within limits.
 // One key frame (first frame only) in sequence.
 TEST_F(VideoProcessorIntegrationTestLibvpx, ProcessNoLossChangeBitRateVP9) {
   SetCodecSettings(&config_, kVideoCodecVP9, 1, false, false, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 200, 30, 0);
   SetRateProfile(&rate_profile, 1, 700, 30, 100);
   SetRateProfile(&rate_profile, 2, 500, 30, 200);
   rate_profile.frame_index_rate_update[3] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 30, 20, 20, 35, 0, 1, &rc_thresholds);
   AddRateControlThresholds(2, 0, 20, 20, 60, 0, 0, &rc_thresholds);
   AddRateControlThresholds(0, 0, 25, 20, 40, 0, 0, &rc_thresholds);
 
   QualityThresholds quality_thresholds(35.5, 30.0, 0.90, 0.85);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP9: Run with no packet loss, with an update (decrease) in frame rate.
 // Lower frame rate means higher per-frame-bandwidth, so easier to encode.
 // At the low bitrate in this test, this means better rate control after the
 // update(s) to lower frame rate. So expect less frame drops, and max values
 // for the rate control metrics can be lower. One key frame (first frame only).
 // Note: quality after update should be higher but we currently compute quality
 // metrics averaged over whole sequence run.
 TEST_F(VideoProcessorIntegrationTestLibvpx,
        ProcessNoLossChangeFrameRateFrameDropVP9) {
   SetCodecSettings(&config_, kVideoCodecVP9, 1, false, false, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 100, 24, 0);
   SetRateProfile(&rate_profile, 1, 100, 15, 100);
   SetRateProfile(&rate_profile, 2, 100, 10, 200);
   rate_profile.frame_index_rate_update[3] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(45, 50, 95, 15, 45, 0, 1, &rc_thresholds);
   AddRateControlThresholds(20, 0, 50, 10, 30, 0, 0, &rc_thresholds);
   AddRateControlThresholds(5, 0, 30, 5, 25, 0, 0, &rc_thresholds);
 
   QualityThresholds quality_thresholds(31.5, 18.0, 0.80, 0.43);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP9: Run with no packet loss and denoiser on. One key frame (first frame).
 TEST_F(VideoProcessorIntegrationTestLibvpx, ProcessNoLossDenoiserOnVP9) {
   SetCodecSettings(&config_, kVideoCodecVP9, 1, false, true, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 20, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(36.8, 35.8, 0.92, 0.91);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // Run with no packet loss, at low bitrate.
 // spatial_resize is on, for this low bitrate expect one resize in sequence.
 // Resize happens on delta frame. Expect only one key frame (first frame).
 TEST_F(VideoProcessorIntegrationTestLibvpx,
        DISABLED_ProcessNoLossSpatialResizeFrameDropVP9) {
   SetCodecSettings(&config_, kVideoCodecVP9, 1, false, false, true, true,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 50, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(228, 70, 160, 15, 80, 1, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(24.0, 13.0, 0.65, 0.37);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // TODO(marpan): Add temporal layer test for VP9, once changes are in
 // vp9 wrapper for this.
 
 #endif  // !defined(RTC_DISABLE_VP9)
 
 // VP8: Run with no packet loss and fixed bitrate. Quality should be very high.
 // One key frame (first frame only) in sequence. Setting |key_frame_interval|
 // to -1 below means no periodic key frames in test.
 TEST_F(VideoProcessorIntegrationTestLibvpx, ProcessZeroPacketLoss) {
   SetCodecSettings(&config_, kVideoCodecVP8, 1, false, true, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 15, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(34.95, 33.0, 0.90, 0.89);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP8: Run with 5% packet loss and fixed bitrate. Quality should be a bit
 // lower. One key frame (first frame only) in sequence.
 TEST_F(VideoProcessorIntegrationTestLibvpx, Process5PercentPacketLoss) {
   config_.networking_config.packet_loss_probability = 0.05f;
   SetCodecSettings(&config_, kVideoCodecVP8, 1, false, true, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 15, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(20.0, 16.0, 0.60, 0.40);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP8: Run with 10% packet loss and fixed bitrate. Quality should be lower.
 // One key frame (first frame only) in sequence.
 TEST_F(VideoProcessorIntegrationTestLibvpx, Process10PercentPacketLoss) {
   config_.networking_config.packet_loss_probability = 0.1f;
   SetCodecSettings(&config_, kVideoCodecVP8, 1, false, true, true, false,
                    kResilienceOn, kCifWidth, kCifHeight);
 
   RateProfile rate_profile;
   SetRateProfile(&rate_profile, 0, 500, 30, 0);
   rate_profile.frame_index_rate_update[1] = kNumFramesShort + 1;
   rate_profile.num_frames = kNumFramesShort;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 40, 20, 10, 15, 0, 1, &rc_thresholds);
 
   QualityThresholds quality_thresholds(19.0, 16.0, 0.50, 0.35);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 #endif  // !defined(WEBRTC_IOS)
 
 // The tests below are currently disabled for Android. For ARM, the encoder
 // uses |cpu_speed| = 12, as opposed to default |cpu_speed| <= 6 for x86,
 // which leads to significantly different quality. The quality and rate control
 // settings in the tests below are defined for encoder speed setting
 // |cpu_speed| <= ~6. A number of settings would need to be significantly
 // modified for the |cpu_speed| = 12 case. For now, keep the tests below
@@ skipping 23 matching lines @@
   rate_profile.frame_index_rate_update[3] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 45, 20, 10, 15, 0, 1, &rc_thresholds);
   AddRateControlThresholds(0, 0, 25, 20, 10, 0, 0, &rc_thresholds);
   AddRateControlThresholds(0, 0, 25, 15, 10, 0, 0, &rc_thresholds);
 
   QualityThresholds quality_thresholds(34.0, 32.0, 0.85, 0.80);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP8: Run with no packet loss, with an update (decrease) in frame rate.
 // Lower frame rate means higher per-frame-bandwidth, so easier to encode.
 // At the bitrate in this test, this means better rate control after the
 // update(s) to lower frame rate. So expect less frame drops, and max values
 // for the rate control metrics can be lower. One key frame (first frame only).
 // Note: quality after update should be higher but we currently compute quality
 // metrics averaged over whole sequence run.
 // Too slow to finish before timeout on iOS. See webrtc:4755.
@@ skipping 16 matching lines @@
   rate_profile.frame_index_rate_update[3] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(40, 20, 75, 15, 60, 0, 1, &rc_thresholds);
   AddRateControlThresholds(10, 0, 25, 10, 35, 0, 0, &rc_thresholds);
   AddRateControlThresholds(0, 0, 20, 10, 15, 0, 0, &rc_thresholds);
 
   QualityThresholds quality_thresholds(31.0, 22.0, 0.80, 0.65);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 // VP8: Run with no packet loss, with 3 temporal layers, with a rate update in
 // the middle of the sequence. The max values for the frame size mismatch and
 // encoding rate mismatch are applied to each layer.
 // No dropped frames in this test, and internal spatial resizer is off.
 // One key frame (first frame only) in sequence, so no spatial resizing.
 // Too slow to finish before timeout on iOS. See webrtc:4755.
 #if defined(WEBRTC_ANDROID) || defined(WEBRTC_IOS)
 #define MAYBE_ProcessNoLossTemporalLayersVP8 \
@@ skipping 11 matching lines @@
   SetRateProfile(&rate_profile, 1, 400, 30, 150);
   rate_profile.frame_index_rate_update[2] = kNumFramesLong + 1;
   rate_profile.num_frames = kNumFramesLong;
 
   std::vector<RateControlThresholds> rc_thresholds;
   AddRateControlThresholds(0, 20, 30, 10, 10, 0, 1, &rc_thresholds);
   AddRateControlThresholds(0, 0, 30, 15, 10, 0, 0, &rc_thresholds);
 
   QualityThresholds quality_thresholds(32.5, 30.0, 0.85, 0.80);
 
-  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds, &quality_thresholds,
-                              kNoVisualizationParams);
+  ProcessFramesAndMaybeVerify(rate_profile, &rc_thresholds,
+    &quality_thresholds, nullptr, kNoVisualizationParams);
 }
 
 }  // namespace test
 }  // namespace webrtc