Move webrtc/{base => rtc_base}

webrtc/base/sslstreamadapter.h

Index: webrtc/base/sslstreamadapter.h
diff --git a/webrtc/base/sslstreamadapter.h b/webrtc/base/sslstreamadapter.h
index 62a724996ef621cc7ea368c30a1589a28ee07bb8..d7c062e4b8ccb5debce80d11db62f49f6861b8c0 100644
--- a/webrtc/base/sslstreamadapter.h
+++ b/webrtc/base/sslstreamadapter.h
@@ -11,265 +11,9 @@
 #ifndef WEBRTC_BASE_SSLSTREAMADAPTER_H_
 #define WEBRTC_BASE_SSLSTREAMADAPTER_H_
 
-#include <memory>
-#include <string>
-#include <vector>
 
-#include "webrtc/base/stream.h"
-#include "webrtc/base/sslidentity.h"
-
-namespace rtc {
-
-// Constants for SSL profile.
-const int TLS_NULL_WITH_NULL_NULL = 0;
-
-// Constants for SRTP profiles.
-const int SRTP_INVALID_CRYPTO_SUITE = 0;
-#ifndef SRTP_AES128_CM_SHA1_80
-const int SRTP_AES128_CM_SHA1_80 = 0x0001;
-#endif
-#ifndef SRTP_AES128_CM_SHA1_32
-const int SRTP_AES128_CM_SHA1_32 = 0x0002;
-#endif
-#ifndef SRTP_AEAD_AES_128_GCM
-const int SRTP_AEAD_AES_128_GCM = 0x0007;
-#endif
-#ifndef SRTP_AEAD_AES_256_GCM
-const int SRTP_AEAD_AES_256_GCM = 0x0008;
-#endif
-
-// Names of SRTP profiles listed above.
-// 128-bit AES with 80-bit SHA-1 HMAC.
-extern const char CS_AES_CM_128_HMAC_SHA1_80[];
-// 128-bit AES with 32-bit SHA-1 HMAC.
-extern const char CS_AES_CM_128_HMAC_SHA1_32[];
-// 128-bit AES GCM with 16 byte AEAD auth tag.
-extern const char CS_AEAD_AES_128_GCM[];
-// 256-bit AES GCM with 16 byte AEAD auth tag.
-extern const char CS_AEAD_AES_256_GCM[];
-
-// Given the DTLS-SRTP protection profile ID, as defined in
-// https://tools.ietf.org/html/rfc4568#section-6.2 , return the SRTP profile
-// name, as defined in https://tools.ietf.org/html/rfc5764#section-4.1.2.
-std::string SrtpCryptoSuiteToName(int crypto_suite);
-
-// The reverse of above conversion.
-int SrtpCryptoSuiteFromName(const std::string& crypto_suite);
-
-// Get key length and salt length for given crypto suite. Returns true for
-// valid suites, otherwise false.
-bool GetSrtpKeyAndSaltLengths(int crypto_suite, int *key_length,
-    int *salt_length);
-
-// Returns true if the given crypto suite id uses a GCM cipher.
-bool IsGcmCryptoSuite(int crypto_suite);
-
-// Returns true if the given crypto suite name uses a GCM cipher.
-bool IsGcmCryptoSuiteName(const std::string& crypto_suite);
-
-struct CryptoOptions {
-  CryptoOptions() {}
-
-  // Helper method to return an instance of the CryptoOptions with GCM crypto
-  // suites disabled. This method should be used instead of depending on current
-  // default values set by the constructor.
-  static CryptoOptions NoGcm();
-
-  // Enable GCM crypto suites from RFC 7714 for SRTP. GCM will only be used
-  // if both sides enable it.
-  bool enable_gcm_crypto_suites = false;
-};
-
-// Returns supported crypto suites, given |crypto_options|.
-// CS_AES_CM_128_HMAC_SHA1_32 will be preferred by default.
-std::vector<int> GetSupportedDtlsSrtpCryptoSuites(
-    const rtc::CryptoOptions& crypto_options);
-
-// SSLStreamAdapter : A StreamInterfaceAdapter that does SSL/TLS.
-// After SSL has been started, the stream will only open on successful
-// SSL verification of certificates, and the communication is
-// encrypted of course.
-//
-// This class was written with SSLAdapter as a starting point. It
-// offers a similar interface, with two differences: there is no
-// support for a restartable SSL connection, and this class has a
-// peer-to-peer mode.
-//
-// The SSL library requires initialization and cleanup. Static method
-// for doing this are in SSLAdapter. They should possibly be moved out
-// to a neutral class.
-
-
-enum SSLRole { SSL_CLIENT, SSL_SERVER };
-enum SSLMode { SSL_MODE_TLS, SSL_MODE_DTLS };
-enum SSLProtocolVersion {
-  SSL_PROTOCOL_TLS_10,
-  SSL_PROTOCOL_TLS_11,
-  SSL_PROTOCOL_TLS_12,
-  SSL_PROTOCOL_DTLS_10 = SSL_PROTOCOL_TLS_11,
-  SSL_PROTOCOL_DTLS_12 = SSL_PROTOCOL_TLS_12,
-};
-enum class SSLPeerCertificateDigestError {
-  NONE,
-  UNKNOWN_ALGORITHM,
-  INVALID_LENGTH,
-  VERIFICATION_FAILED,
-};
-
-// Errors for Read -- in the high range so no conflict with OpenSSL.
-enum { SSE_MSG_TRUNC = 0xff0001 };
-
-// Used to send back UMA histogram value. Logged when Dtls handshake fails.
-enum class SSLHandshakeError { UNKNOWN, INCOMPATIBLE_CIPHERSUITE, MAX_VALUE };
-
-class SSLStreamAdapter : public StreamAdapterInterface {
- public:
-  // Instantiate an SSLStreamAdapter wrapping the given stream,
-  // (using the selected implementation for the platform).
-  // Caller is responsible for freeing the returned object.
-  static SSLStreamAdapter* Create(StreamInterface* stream);
-
-  explicit SSLStreamAdapter(StreamInterface* stream);
-  ~SSLStreamAdapter() override;
-
-  void set_ignore_bad_cert(bool ignore) { ignore_bad_cert_ = ignore; }
-  bool ignore_bad_cert() const { return ignore_bad_cert_; }
-
-  void set_client_auth_enabled(bool enabled) { client_auth_enabled_ = enabled; }
-  bool client_auth_enabled() const { return client_auth_enabled_; }
-
-  // Specify our SSL identity: key and certificate. SSLStream takes ownership
-  // of the SSLIdentity object and will free it when appropriate. Should be
-  // called no more than once on a given SSLStream instance.
-  virtual void SetIdentity(SSLIdentity* identity) = 0;
-
-  // Call this to indicate that we are to play the server role (or client role,
-  // if the default argument is replaced by SSL_CLIENT).
-  // The default argument is for backward compatibility.
-  // TODO(ekr@rtfm.com): rename this SetRole to reflect its new function
-  virtual void SetServerRole(SSLRole role = SSL_SERVER) = 0;
-
-  // Do DTLS or TLS.
-  virtual void SetMode(SSLMode mode) = 0;
-
-  // Set maximum supported protocol version. The highest version supported by
-  // both ends will be used for the connection, i.e. if one party supports
-  // DTLS 1.0 and the other DTLS 1.2, DTLS 1.0 will be used.
-  // If requested version is not supported by underlying crypto library, the
-  // next lower will be used.
-  virtual void SetMaxProtocolVersion(SSLProtocolVersion version) = 0;
-
-  // Set the initial retransmission timeout for DTLS messages. When the timeout
-  // expires, the message gets retransmitted and the timeout is exponentially
-  // increased.
-  // This should only be called before StartSSL().
-  virtual void SetInitialRetransmissionTimeout(int timeout_ms) = 0;
-
-  // StartSSL starts negotiation with a peer, whose certificate is verified
-  // using the certificate digest. Generally, SetIdentity() and possibly
-  // SetServerRole() should have been called before this.
-  // SetPeerCertificateDigest() must also be called. It may be called after
-  // StartSSLWithPeer() but must be called before the underlying stream opens.
-  //
-  // Use of the stream prior to calling StartSSL will pass data in clear text.
-  // Calling StartSSL causes SSL negotiation to begin as soon as possible: right
-  // away if the underlying wrapped stream is already opened, or else as soon as
-  // it opens.
-  //
-  // StartSSL returns a negative error code on failure. Returning 0 means
-  // success so far, but negotiation is probably not complete and will continue
-  // asynchronously. In that case, the exposed stream will open after
-  // successful negotiation and verification, or an SE_CLOSE event will be
-  // raised if negotiation fails.
-  virtual int StartSSL() = 0;
-
-  // Specify the digest of the certificate that our peer is expected to use.
-  // Only this certificate will be accepted during SSL verification. The
-  // certificate is assumed to have been obtained through some other secure
-  // channel (such as the signaling channel). This must specify the terminal
-  // certificate, not just a CA. SSLStream makes a copy of the digest value.
-  //
-  // Returns true if successful.
-  // |error| is optional and provides more information about the failure.
-  virtual bool SetPeerCertificateDigest(
-      const std::string& digest_alg,
-      const unsigned char* digest_val,
-      size_t digest_len,
-      SSLPeerCertificateDigestError* error = nullptr) = 0;
-
-  // Retrieves the peer's X.509 certificate, if a connection has been
-  // established. It returns the transmitted over SSL, including the entire
-  // chain.
-  virtual std::unique_ptr<SSLCertificate> GetPeerCertificate() const = 0;
-
-  // Retrieves the IANA registration id of the cipher suite used for the
-  // connection (e.g. 0x2F for "TLS_RSA_WITH_AES_128_CBC_SHA").
-  virtual bool GetSslCipherSuite(int* cipher_suite);
-
-  virtual int GetSslVersion() const = 0;
-
-  // Key Exporter interface from RFC 5705
-  // Arguments are:
-  // label               -- the exporter label.
-  //                        part of the RFC defining each exporter
-  //                        usage (IN)
-  // context/context_len -- a context to bind to for this connection;
-  //                        optional, can be null, 0 (IN)
-  // use_context         -- whether to use the context value
-  //                        (needed to distinguish no context from
-  //                        zero-length ones).
-  // result              -- where to put the computed value
-  // result_len          -- the length of the computed value
-  virtual bool ExportKeyingMaterial(const std::string& label,
-                                    const uint8_t* context,
-                                    size_t context_len,
-                                    bool use_context,
-                                    uint8_t* result,
-                                    size_t result_len);
-
-  // DTLS-SRTP interface
-  virtual bool SetDtlsSrtpCryptoSuites(const std::vector<int>& crypto_suites);
-  virtual bool GetDtlsSrtpCryptoSuite(int* crypto_suite);
-
-  // Returns true if a TLS connection has been established.
-  // The only difference between this and "GetState() == SE_OPEN" is that if
-  // the peer certificate digest hasn't been verified, the state will still be
-  // SS_OPENING but IsTlsConnected should return true.
-  virtual bool IsTlsConnected() = 0;
-
-  // Capabilities testing.
-  // Used to have "DTLS supported", "DTLS-SRTP supported" etc. methods, but now
-  // that's assumed.
-  static bool IsBoringSsl();
-
-  // Returns true iff the supplied cipher is deemed to be strong.
-  // TODO(torbjorng): Consider removing the KeyType argument.
-  static bool IsAcceptableCipher(int cipher, KeyType key_type);
-  static bool IsAcceptableCipher(const std::string& cipher, KeyType key_type);
-
-  // TODO(guoweis): Move this away from a static class method. Currently this is
-  // introduced such that any caller could depend on sslstreamadapter.h without
-  // depending on specific SSL implementation.
-  static std::string SslCipherSuiteToName(int cipher_suite);
-
-  // Use our timeutils.h source of timing in BoringSSL, allowing us to test
-  // using a fake clock.
-  static void enable_time_callback_for_testing();
-
-  sigslot::signal1<SSLHandshakeError> SignalSSLHandshakeError;
-
- private:
-  // If true, the server certificate need not match the configured
-  // server_name, and in fact missing certificate authority and other
-  // verification errors are ignored.
-  bool ignore_bad_cert_;
-
-  // If true (default), the client is required to provide a certificate during
-  // handshake. If no certificate is given, handshake fails. This applies to
-  // server mode only.
-  bool client_auth_enabled_;
-};
-
-}  // namespace rtc
+// This header is deprecated and is just left here temporarily during
+// refactoring. See https://bugs.webrtc.org/7634 for more details.
+#include "webrtc/rtc_base/sslstreamadapter.h"
 
 #endif  // WEBRTC_BASE_SSLSTREAMADAPTER_H_