Move RTCAudioSession* files modules/audio_device/ -> sdk/Framework.

webrtc/modules/audio_device/ios/objc/RTCAudioSession.h

Index: webrtc/modules/audio_device/ios/objc/RTCAudioSession.h
diff --git a/webrtc/modules/audio_device/ios/objc/RTCAudioSession.h b/webrtc/modules/audio_device/ios/objc/RTCAudioSession.h
index c0ea2163ae2a908d16d2ba49f56fc84606a9bb69..2f52ca383d1263978028dacab1ff52ea7c519009 100644
--- a/webrtc/modules/audio_device/ios/objc/RTCAudioSession.h
+++ b/webrtc/modules/audio_device/ios/objc/RTCAudioSession.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright 2016 The WebRTC Project Authors. All rights reserved.
+ *  Copyright 2017 The WebRTC Project Authors. All rights reserved.
  *
  *  Use of this source code is governed by a BSD-style license
  *  that can be found in the LICENSE file in the root of the source
@@ -8,235 +8,4 @@
  *  be found in the AUTHORS file in the root of the source tree.
  */
 
-#import <AVFoundation/AVFoundation.h>
-#import <Foundation/Foundation.h>
-
-#import "WebRTC/RTCMacros.h"
-
-NS_ASSUME_NONNULL_BEGIN
-
-extern NSString * const kRTCAudioSessionErrorDomain;
-/** Method that requires lock was called without lock. */
-extern NSInteger const kRTCAudioSessionErrorLockRequired;
-/** Unknown configuration error occurred. */
-extern NSInteger const kRTCAudioSessionErrorConfiguration;
-
-@class RTCAudioSession;
-@class RTCAudioSessionConfiguration;
-
-// Surfaces AVAudioSession events. WebRTC will listen directly for notifications
-// from AVAudioSession and handle them before calling these delegate methods,
-// at which point applications can perform additional processing if required.
-RTC_EXPORT
-@protocol RTCAudioSessionDelegate <NSObject>
-
-@optional
-/** Called on a system notification thread when AVAudioSession starts an
- *  interruption event.
- */
-- (void)audioSessionDidBeginInterruption:(RTCAudioSession *)session;
-
-/** Called on a system notification thread when AVAudioSession ends an
- *  interruption event.
- */
-- (void)audioSessionDidEndInterruption:(RTCAudioSession *)session
-                   shouldResumeSession:(BOOL)shouldResumeSession;
-
-/** Called on a system notification thread when AVAudioSession changes the
- *  route.
- */
-- (void)audioSessionDidChangeRoute:(RTCAudioSession *)session
-           reason:(AVAudioSessionRouteChangeReason)reason
-    previousRoute:(AVAudioSessionRouteDescription *)previousRoute;
-
-/** Called on a system notification thread when AVAudioSession media server
- *  terminates.
- */
-- (void)audioSessionMediaServerTerminated:(RTCAudioSession *)session;
-
-/** Called on a system notification thread when AVAudioSession media server
- *  restarts.
- */
-- (void)audioSessionMediaServerReset:(RTCAudioSession *)session;
-
-// TODO(tkchin): Maybe handle SilenceSecondaryAudioHintNotification.
-
-- (void)audioSession:(RTCAudioSession *)session
-    didChangeCanPlayOrRecord:(BOOL)canPlayOrRecord;
-
-/** Called on a WebRTC thread when the audio device is notified to begin
- *  playback or recording.
- */
-- (void)audioSessionDidStartPlayOrRecord:(RTCAudioSession *)session;
-
-/** Called on a WebRTC thread when the audio device is notified to stop
- *  playback or recording.
- */
-- (void)audioSessionDidStopPlayOrRecord:(RTCAudioSession *)session;
-
-/** Called when the AVAudioSession output volume value changes. */
-- (void)audioSession:(RTCAudioSession *)audioSession
-    didChangeOutputVolume:(float)outputVolume;
-
-@end
-
-/** This is a protocol used to inform RTCAudioSession when the audio session
- *  activation state has changed outside of RTCAudioSession. The current known use
- *  case of this is when CallKit activates the audio session for the application
- */
-RTC_EXPORT
-@protocol RTCAudioSessionActivationDelegate <NSObject>
-
-/** Called when the audio session is activated outside of the app by iOS. */
-- (void)audioSessionDidActivate:(AVAudioSession *)session;
-
-/** Called when the audio session is deactivated outside of the app by iOS. */
-- (void)audioSessionDidDeactivate:(AVAudioSession *)session;
-
-@end
-
-/** Proxy class for AVAudioSession that adds a locking mechanism similar to
- *  AVCaptureDevice. This is used to that interleaving configurations between
- *  WebRTC and the application layer are avoided.
- *
- *  RTCAudioSession also coordinates activation so that the audio session is
- *  activated only once. See |setActive:error:|.
- */
-RTC_EXPORT
-@interface RTCAudioSession : NSObject <RTCAudioSessionActivationDelegate>
-
-/** Convenience property to access the AVAudioSession singleton. Callers should
- *  not call setters on AVAudioSession directly, but other method invocations
- *  are fine.
- */
-@property(nonatomic, readonly) AVAudioSession *session;
-
-/** Our best guess at whether the session is active based on results of calls to
- *  AVAudioSession.
- */
-@property(nonatomic, readonly) BOOL isActive;
-/** Whether RTCAudioSession is currently locked for configuration. */
-@property(nonatomic, readonly) BOOL isLocked;
-
-/** If YES, WebRTC will not initialize the audio unit automatically when an
- *  audio track is ready for playout or recording. Instead, applications should
- *  call setIsAudioEnabled. If NO, WebRTC will initialize the audio unit
- *  as soon as an audio track is ready for playout or recording.
- */
-@property(nonatomic, assign) BOOL useManualAudio;
-
-/** This property is only effective if useManualAudio is YES.
- *  Represents permission for WebRTC to initialize the VoIP audio unit.
- *  When set to NO, if the VoIP audio unit used by WebRTC is active, it will be
- *  stopped and uninitialized. This will stop incoming and outgoing audio.
- *  When set to YES, WebRTC will initialize and start the audio unit when it is
- *  needed (e.g. due to establishing an audio connection).
- *  This property was introduced to work around an issue where if an AVPlayer is
- *  playing audio while the VoIP audio unit is initialized, its audio would be
- *  either cut off completely or played at a reduced volume. By preventing
- *  the audio unit from being initialized until after the audio has completed,
- *  we are able to prevent the abrupt cutoff.
- */
-@property(nonatomic, assign) BOOL isAudioEnabled;
-
-// Proxy properties.
-@property(readonly) NSString *category;
-@property(readonly) AVAudioSessionCategoryOptions categoryOptions;
-@property(readonly) NSString *mode;
-@property(readonly) BOOL secondaryAudioShouldBeSilencedHint;
-@property(readonly) AVAudioSessionRouteDescription *currentRoute;
-@property(readonly) NSInteger maximumInputNumberOfChannels;
-@property(readonly) NSInteger maximumOutputNumberOfChannels;
-@property(readonly) float inputGain;
-@property(readonly) BOOL inputGainSettable;
-@property(readonly) BOOL inputAvailable;
-@property(readonly, nullable)
-    NSArray<AVAudioSessionDataSourceDescription *> * inputDataSources;
-@property(readonly, nullable)
-  AVAudioSessionDataSourceDescription *inputDataSource;
-@property(readonly, nullable)
-    NSArray<AVAudioSessionDataSourceDescription *> * outputDataSources;
-@property(readonly, nullable)
-    AVAudioSessionDataSourceDescription *outputDataSource;
-@property(readonly) double sampleRate;
-@property(readonly) double preferredSampleRate;
-@property(readonly) NSInteger inputNumberOfChannels;
-@property(readonly) NSInteger outputNumberOfChannels;
-@property(readonly) float outputVolume;
-@property(readonly) NSTimeInterval inputLatency;
-@property(readonly) NSTimeInterval outputLatency;
-@property(readonly) NSTimeInterval IOBufferDuration;
-@property(readonly) NSTimeInterval preferredIOBufferDuration;
-
-/** Default constructor. */
-+ (instancetype)sharedInstance;
-- (instancetype)init NS_UNAVAILABLE;
-
-/** Adds a delegate, which is held weakly. */
-- (void)addDelegate:(id<RTCAudioSessionDelegate>)delegate;
-/** Removes an added delegate. */
-- (void)removeDelegate:(id<RTCAudioSessionDelegate>)delegate;
-
-/** Request exclusive access to the audio session for configuration. This call
- *  will block if the lock is held by another object.
- */
-- (void)lockForConfiguration;
-/** Relinquishes exclusive access to the audio session. */
-- (void)unlockForConfiguration;
-
-/** If |active|, activates the audio session if it isn't already active.
- *  Successful calls must be balanced with a setActive:NO when activation is no
- *  longer required. If not |active|, deactivates the audio session if one is
- *  active and this is the last balanced call. When deactivating, the
- *  AVAudioSessionSetActiveOptionNotifyOthersOnDeactivation option is passed to
- *  AVAudioSession.
- */
-- (BOOL)setActive:(BOOL)active
-            error:(NSError **)outError;
-
-// The following methods are proxies for the associated methods on
-// AVAudioSession. |lockForConfiguration| must be called before using them
-// otherwise they will fail with kRTCAudioSessionErrorLockRequired.
-
-- (BOOL)setCategory:(NSString *)category
-        withOptions:(AVAudioSessionCategoryOptions)options
-              error:(NSError **)outError;
-- (BOOL)setMode:(NSString *)mode error:(NSError **)outError;
-- (BOOL)setInputGain:(float)gain error:(NSError **)outError;
-- (BOOL)setPreferredSampleRate:(double)sampleRate error:(NSError **)outError;
-- (BOOL)setPreferredIOBufferDuration:(NSTimeInterval)duration
-                               error:(NSError **)outError;
-- (BOOL)setPreferredInputNumberOfChannels:(NSInteger)count
-                                    error:(NSError **)outError;
-- (BOOL)setPreferredOutputNumberOfChannels:(NSInteger)count
-                                     error:(NSError **)outError;
-- (BOOL)overrideOutputAudioPort:(AVAudioSessionPortOverride)portOverride
-                          error:(NSError **)outError;
-- (BOOL)setPreferredInput:(AVAudioSessionPortDescription *)inPort
-                    error:(NSError **)outError;
-- (BOOL)setInputDataSource:(AVAudioSessionDataSourceDescription *)dataSource
-                     error:(NSError **)outError;
-- (BOOL)setOutputDataSource:(AVAudioSessionDataSourceDescription *)dataSource
-                      error:(NSError **)outError;
-@end
-
-@interface RTCAudioSession (Configuration)
-
-/** Applies the configuration to the current session. Attempts to set all
- *  properties even if previous ones fail. Only the last error will be
- *  returned.
- *  |lockForConfiguration| must be called first.
- */
-- (BOOL)setConfiguration:(RTCAudioSessionConfiguration *)configuration
-                   error:(NSError **)outError;
-
-/** Convenience method that calls both setConfiguration and setActive.
- *  |lockForConfiguration| must be called first.
- */
-- (BOOL)setConfiguration:(RTCAudioSessionConfiguration *)configuration
-                  active:(BOOL)active
-                   error:(NSError **)outError;
-
-@end
-
-NS_ASSUME_NONNULL_END
+#import "webrtc/sdk/objc/Framework/Headers/WebRTC/RTCAudioSession.h"