Log audio network adapter decisions in event log.

webrtc/logging/rtc_event_log/rtc_event_log.proto

Index: webrtc/logging/rtc_event_log/rtc_event_log.proto
diff --git a/webrtc/logging/rtc_event_log/rtc_event_log.proto b/webrtc/logging/rtc_event_log/rtc_event_log.proto
index a6d169579659e496379394de86cb9b4fac220b13..e80772297997ce2b088404d8ff83395b71fab4f8 100644
--- a/webrtc/logging/rtc_event_log/rtc_event_log.proto
+++ b/webrtc/logging/rtc_event_log/rtc_event_log.proto
@@ -37,6 +37,7 @@ message Event {
     VIDEO_SENDER_CONFIG_EVENT = 9;
     AUDIO_RECEIVER_CONFIG_EVENT = 10;
     AUDIO_SENDER_CONFIG_EVENT = 11;
+    AUDIO_NETWORK_ADAPTATION_EVENT = 16;
   }
 
   // required - Indicates the type of this event
@@ -65,6 +66,9 @@ message Event {
 
   // optional - but required if type == AUDIO_SENDER_CONFIG_EVENT
   optional AudioSendConfig audio_sender_config = 11;
+
+  // optional - but required if type == AUDIO_NETWORK_ADAPTATION_EVENT
+  optional AudioNetworkAdaptation audio_network_adaptation = 16;
 }
 
 message RtpPacket {
@@ -227,3 +231,24 @@ message AudioSendConfig {
   // RTP header extensions used for the outgoing audio stream.
   repeated RtpHeaderExtension header_extensions = 2;
 }
+
+message AudioNetworkAdaptation {

[the sun, 2017/01/12 13:35:06]

Are all the fields here dynamically changed by ANA? If not, it seems they would
be more suitably placed in the AudioSendConfig as codec config params.

[michaelt, 2017/01/12 14:36:54]

Yes all of the fields here can be dynamically changed.

+  // Bit rate that the audio encoder is operating at.
+  optional int32 bitrate_bps = 1;
+
+  // Frame length that each encoded audio packet consists of.
+  optional int32 frame_length_ms = 2;
+
+  // Packet loss fraction that the encoder's forward error correction (FEC) is
+  // optimized for.
+  optional float uplink_packet_loss_fraction = 3;
+
+  // Whether forward error correction (FEC) is turned on or off.
+  optional bool enable_fec = 4;
+
+  // Whether discontinuous transmission (DTX) is turned on or off.
+  optional bool enable_dtx = 5;
+
+  // Number of audio channels that each encoded packet consists of.
+  optional uint32 num_channels = 6;
+}