Index: third_party/zlib/inffast.c |
diff --git a/third_party/zlib/inffast.c b/third_party/zlib/inffast.c |
new file mode 100644 |
index 0000000000000000000000000000000000000000..2f1d60b43b8a9deacf22bb5526a979dcc219a68f |
--- /dev/null |
+++ b/third_party/zlib/inffast.c |
@@ -0,0 +1,340 @@ |
+/* inffast.c -- fast decoding |
+ * Copyright (C) 1995-2008, 2010 Mark Adler |
+ * For conditions of distribution and use, see copyright notice in zlib.h |
+ */ |
+ |
+#include "zutil.h" |
+#include "inftrees.h" |
+#include "inflate.h" |
+#include "inffast.h" |
+ |
+#ifndef ASMINF |
+ |
+/* Allow machine dependent optimization for post-increment or pre-increment. |
+ Based on testing to date, |
+ Pre-increment preferred for: |
+ - PowerPC G3 (Adler) |
+ - MIPS R5000 (Randers-Pehrson) |
+ Post-increment preferred for: |
+ - none |
+ No measurable difference: |
+ - Pentium III (Anderson) |
+ - M68060 (Nikl) |
+ */ |
+#ifdef POSTINC |
+# define OFF 0 |
+# define PUP(a) *(a)++ |
+#else |
+# define OFF 1 |
+# define PUP(a) *++(a) |
+#endif |
+ |
+/* |
+ Decode literal, length, and distance codes and write out the resulting |
+ literal and match bytes until either not enough input or output is |
+ available, an end-of-block is encountered, or a data error is encountered. |
+ When large enough input and output buffers are supplied to inflate(), for |
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the |
+ inflate execution time is spent in this routine. |
+ |
+ Entry assumptions: |
+ |
+ state->mode == LEN |
+ strm->avail_in >= 6 |
+ strm->avail_out >= 258 |
+ start >= strm->avail_out |
+ state->bits < 8 |
+ |
+ On return, state->mode is one of: |
+ |
+ LEN -- ran out of enough output space or enough available input |
+ TYPE -- reached end of block code, inflate() to interpret next block |
+ BAD -- error in block data |
+ |
+ Notes: |
+ |
+ - The maximum input bits used by a length/distance pair is 15 bits for the |
+ length code, 5 bits for the length extra, 15 bits for the distance code, |
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes. |
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid |
+ checking for available input while decoding. |
+ |
+ - The maximum bytes that a single length/distance pair can output is 258 |
+ bytes, which is the maximum length that can be coded. inflate_fast() |
+ requires strm->avail_out >= 258 for each loop to avoid checking for |
+ output space. |
+ */ |
+void ZLIB_INTERNAL inflate_fast(strm, start) |
+z_streamp strm; |
+unsigned start; /* inflate()'s starting value for strm->avail_out */ |
+{ |
+ struct inflate_state FAR *state; |
+ unsigned char FAR *in; /* local strm->next_in */ |
+ unsigned char FAR *last; /* while in < last, enough input available */ |
+ unsigned char FAR *out; /* local strm->next_out */ |
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ |
+ unsigned char FAR *end; /* while out < end, enough space available */ |
+#ifdef INFLATE_STRICT |
+ unsigned dmax; /* maximum distance from zlib header */ |
+#endif |
+ unsigned wsize; /* window size or zero if not using window */ |
+ unsigned whave; /* valid bytes in the window */ |
+ unsigned wnext; /* window write index */ |
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ |
+ unsigned long hold; /* local strm->hold */ |
+ unsigned bits; /* local strm->bits */ |
+ code const FAR *lcode; /* local strm->lencode */ |
+ code const FAR *dcode; /* local strm->distcode */ |
+ unsigned lmask; /* mask for first level of length codes */ |
+ unsigned dmask; /* mask for first level of distance codes */ |
+ code here; /* retrieved table entry */ |
+ unsigned op; /* code bits, operation, extra bits, or */ |
+ /* window position, window bytes to copy */ |
+ unsigned len; /* match length, unused bytes */ |
+ unsigned dist; /* match distance */ |
+ unsigned char FAR *from; /* where to copy match from */ |
+ |
+ /* copy state to local variables */ |
+ state = (struct inflate_state FAR *)strm->state; |
+ in = strm->next_in - OFF; |
+ last = in + (strm->avail_in - 5); |
+ out = strm->next_out - OFF; |
+ beg = out - (start - strm->avail_out); |
+ end = out + (strm->avail_out - 257); |
+#ifdef INFLATE_STRICT |
+ dmax = state->dmax; |
+#endif |
+ wsize = state->wsize; |
+ whave = state->whave; |
+ wnext = state->wnext; |
+ window = state->window; |
+ hold = state->hold; |
+ bits = state->bits; |
+ lcode = state->lencode; |
+ dcode = state->distcode; |
+ lmask = (1U << state->lenbits) - 1; |
+ dmask = (1U << state->distbits) - 1; |
+ |
+ /* decode literals and length/distances until end-of-block or not enough |
+ input data or output space */ |
+ do { |
+ if (bits < 15) { |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ } |
+ here = lcode[hold & lmask]; |
+ dolen: |
+ op = (unsigned)(here.bits); |
+ hold >>= op; |
+ bits -= op; |
+ op = (unsigned)(here.op); |
+ if (op == 0) { /* literal */ |
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? |
+ "inflate: literal '%c'\n" : |
+ "inflate: literal 0x%02x\n", here.val)); |
+ PUP(out) = (unsigned char)(here.val); |
+ } |
+ else if (op & 16) { /* length base */ |
+ len = (unsigned)(here.val); |
+ op &= 15; /* number of extra bits */ |
+ if (op) { |
+ if (bits < op) { |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ } |
+ len += (unsigned)hold & ((1U << op) - 1); |
+ hold >>= op; |
+ bits -= op; |
+ } |
+ Tracevv((stderr, "inflate: length %u\n", len)); |
+ if (bits < 15) { |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ } |
+ here = dcode[hold & dmask]; |
+ dodist: |
+ op = (unsigned)(here.bits); |
+ hold >>= op; |
+ bits -= op; |
+ op = (unsigned)(here.op); |
+ if (op & 16) { /* distance base */ |
+ dist = (unsigned)(here.val); |
+ op &= 15; /* number of extra bits */ |
+ if (bits < op) { |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ if (bits < op) { |
+ hold += (unsigned long)(PUP(in)) << bits; |
+ bits += 8; |
+ } |
+ } |
+ dist += (unsigned)hold & ((1U << op) - 1); |
+#ifdef INFLATE_STRICT |
+ if (dist > dmax) { |
+ strm->msg = (char *)"invalid distance too far back"; |
+ state->mode = BAD; |
+ break; |
+ } |
+#endif |
+ hold >>= op; |
+ bits -= op; |
+ Tracevv((stderr, "inflate: distance %u\n", dist)); |
+ op = (unsigned)(out - beg); /* max distance in output */ |
+ if (dist > op) { /* see if copy from window */ |
+ op = dist - op; /* distance back in window */ |
+ if (op > whave) { |
+ if (state->sane) { |
+ strm->msg = |
+ (char *)"invalid distance too far back"; |
+ state->mode = BAD; |
+ break; |
+ } |
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR |
+ if (len <= op - whave) { |
+ do { |
+ PUP(out) = 0; |
+ } while (--len); |
+ continue; |
+ } |
+ len -= op - whave; |
+ do { |
+ PUP(out) = 0; |
+ } while (--op > whave); |
+ if (op == 0) { |
+ from = out - dist; |
+ do { |
+ PUP(out) = PUP(from); |
+ } while (--len); |
+ continue; |
+ } |
+#endif |
+ } |
+ from = window - OFF; |
+ if (wnext == 0) { /* very common case */ |
+ from += wsize - op; |
+ if (op < len) { /* some from window */ |
+ len -= op; |
+ do { |
+ PUP(out) = PUP(from); |
+ } while (--op); |
+ from = out - dist; /* rest from output */ |
+ } |
+ } |
+ else if (wnext < op) { /* wrap around window */ |
+ from += wsize + wnext - op; |
+ op -= wnext; |
+ if (op < len) { /* some from end of window */ |
+ len -= op; |
+ do { |
+ PUP(out) = PUP(from); |
+ } while (--op); |
+ from = window - OFF; |
+ if (wnext < len) { /* some from start of window */ |
+ op = wnext; |
+ len -= op; |
+ do { |
+ PUP(out) = PUP(from); |
+ } while (--op); |
+ from = out - dist; /* rest from output */ |
+ } |
+ } |
+ } |
+ else { /* contiguous in window */ |
+ from += wnext - op; |
+ if (op < len) { /* some from window */ |
+ len -= op; |
+ do { |
+ PUP(out) = PUP(from); |
+ } while (--op); |
+ from = out - dist; /* rest from output */ |
+ } |
+ } |
+ while (len > 2) { |
+ PUP(out) = PUP(from); |
+ PUP(out) = PUP(from); |
+ PUP(out) = PUP(from); |
+ len -= 3; |
+ } |
+ if (len) { |
+ PUP(out) = PUP(from); |
+ if (len > 1) |
+ PUP(out) = PUP(from); |
+ } |
+ } |
+ else { |
+ from = out - dist; /* copy direct from output */ |
+ do { /* minimum length is three */ |
+ PUP(out) = PUP(from); |
+ PUP(out) = PUP(from); |
+ PUP(out) = PUP(from); |
+ len -= 3; |
+ } while (len > 2); |
+ if (len) { |
+ PUP(out) = PUP(from); |
+ if (len > 1) |
+ PUP(out) = PUP(from); |
+ } |
+ } |
+ } |
+ else if ((op & 64) == 0) { /* 2nd level distance code */ |
+ here = dcode[here.val + (hold & ((1U << op) - 1))]; |
+ goto dodist; |
+ } |
+ else { |
+ strm->msg = (char *)"invalid distance code"; |
+ state->mode = BAD; |
+ break; |
+ } |
+ } |
+ else if ((op & 64) == 0) { /* 2nd level length code */ |
+ here = lcode[here.val + (hold & ((1U << op) - 1))]; |
+ goto dolen; |
+ } |
+ else if (op & 32) { /* end-of-block */ |
+ Tracevv((stderr, "inflate: end of block\n")); |
+ state->mode = TYPE; |
+ break; |
+ } |
+ else { |
+ strm->msg = (char *)"invalid literal/length code"; |
+ state->mode = BAD; |
+ break; |
+ } |
+ } while (in < last && out < end); |
+ |
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ |
+ len = bits >> 3; |
+ in -= len; |
+ bits -= len << 3; |
+ hold &= (1U << bits) - 1; |
+ |
+ /* update state and return */ |
+ strm->next_in = in + OFF; |
+ strm->next_out = out + OFF; |
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); |
+ strm->avail_out = (unsigned)(out < end ? |
+ 257 + (end - out) : 257 - (out - end)); |
+ state->hold = hold; |
+ state->bits = bits; |
+ return; |
+} |
+ |
+/* |
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): |
+ - Using bit fields for code structure |
+ - Different op definition to avoid & for extra bits (do & for table bits) |
+ - Three separate decoding do-loops for direct, window, and wnext == 0 |
+ - Special case for distance > 1 copies to do overlapped load and store copy |
+ - Explicit branch predictions (based on measured branch probabilities) |
+ - Deferring match copy and interspersed it with decoding subsequent codes |
+ - Swapping literal/length else |
+ - Swapping window/direct else |
+ - Larger unrolled copy loops (three is about right) |
+ - Moving len -= 3 statement into middle of loop |
+ */ |
+ |
+#endif /* !ASMINF */ |