Add H264 bitstream rewriting to limit frame reordering marker in header

webrtc/modules/rtp_rtcp/source/h264_sps_parser.cc

Index: webrtc/modules/rtp_rtcp/source/h264_sps_parser.cc
diff --git a/webrtc/modules/rtp_rtcp/source/h264_sps_parser.cc b/webrtc/modules/rtp_rtcp/source/h264_sps_parser.cc
deleted file mode 100644
index 904a9e2562b50ef6c8393b22c709572188578030..0000000000000000000000000000000000000000
--- a/webrtc/modules/rtp_rtcp/source/h264_sps_parser.cc
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- *  Copyright (c) 2015 The WebRTC project authors. All Rights Reserved.
- *
- *  Use of this source code is governed by a BSD-style license
- *  that can be found in the LICENSE file in the root of the source
- *  tree. An additional intellectual property rights grant can be found
- *  in the file PATENTS.  All contributing project authors may
- *  be found in the AUTHORS file in the root of the source tree.
- */
-
-#include "webrtc/modules/rtp_rtcp/source/h264_sps_parser.h"
-
-#include "webrtc/base/bitbuffer.h"
-#include "webrtc/base/bytebuffer.h"
-#include "webrtc/base/logging.h"
-
-#define RETURN_FALSE_ON_FAIL(x) \
-  if (!(x)) {                   \
-    return false;               \
-  }
-
-namespace webrtc {
-
-H264SpsParser::H264SpsParser(const uint8_t* sps, size_t byte_length)
-    : sps_(sps), byte_length_(byte_length), width_(), height_() {
-}
-
-bool H264SpsParser::Parse() {
-  // General note: this is based off the 02/2014 version of the H.264 standard.
-  // You can find it on this page:
-  // http://www.itu.int/rec/T-REC-H.264
-
-  const char* sps_bytes = reinterpret_cast<const char*>(sps_);
-  // First, parse out rbsp, which is basically the source buffer minus emulation
-  // bytes (the last byte of a 0x00 0x00 0x03 sequence). RBSP is defined in
-  // section 7.3.1 of the H.264 standard.
-  rtc::ByteBufferWriter rbsp_buffer;
-  for (size_t i = 0; i < byte_length_;) {
-    // Be careful about over/underflow here. byte_length_ - 3 can underflow, and
-    // i + 3 can overflow, but byte_length_ - i can't, because i < byte_length_
-    // above, and that expression will produce the number of bytes left in
-    // the stream including the byte at i.
-    if (byte_length_ - i >= 3 && sps_[i] == 0 && sps_[i + 1] == 0 &&
-        sps_[i + 2] == 3) {
-      // Two rbsp bytes + the emulation byte.
-      rbsp_buffer.WriteBytes(sps_bytes + i, 2);
-      i += 3;
-    } else {
-      // Single rbsp byte.
-      rbsp_buffer.WriteBytes(sps_bytes + i, 1);
-      i++;
-    }
-  }
-
-  // Now, we need to use a bit buffer to parse through the actual AVC SPS
-  // format. See Section 7.3.2.1.1 ("Sequence parameter set data syntax") of the
-  // H.264 standard for a complete description.
-  // Since we only care about resolution, we ignore the majority of fields, but
-  // we still have to actively parse through a lot of the data, since many of
-  // the fields have variable size.
-  // We're particularly interested in:
-  // chroma_format_idc -> affects crop units
-  // pic_{width,height}_* -> resolution of the frame in macroblocks (16x16).
-  // frame_crop_*_offset -> crop information
-  rtc::BitBuffer parser(reinterpret_cast<const uint8_t*>(rbsp_buffer.Data()),
-                        rbsp_buffer.Length());
-
-  // The golomb values we have to read, not just consume.
-  uint32_t golomb_ignored;
-
-  // separate_colour_plane_flag is optional (assumed 0), but has implications
-  // about the ChromaArrayType, which modifies how we treat crop coordinates.
-  uint32_t separate_colour_plane_flag = 0;
-  // chroma_format_idc will be ChromaArrayType if separate_colour_plane_flag is
-  // 0. It defaults to 1, when not specified.
-  uint32_t chroma_format_idc = 1;
-
-  // profile_idc: u(8). We need it to determine if we need to read/skip chroma
-  // formats.
-  uint8_t profile_idc;
-  RETURN_FALSE_ON_FAIL(parser.ReadUInt8(&profile_idc));
-  // constraint_set0_flag through constraint_set5_flag + reserved_zero_2bits
-  // 1 bit each for the flags + 2 bits = 8 bits = 1 byte.
-  RETURN_FALSE_ON_FAIL(parser.ConsumeBytes(1));
-  // level_idc: u(8)
-  RETURN_FALSE_ON_FAIL(parser.ConsumeBytes(1));
-  // seq_parameter_set_id: ue(v)
-  RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-  // See if profile_idc has chroma format information.
-  if (profile_idc == 100 || profile_idc == 110 || profile_idc == 122 ||
-      profile_idc == 244 || profile_idc == 44 || profile_idc == 83 ||
-      profile_idc == 86 || profile_idc == 118 || profile_idc == 128 ||
-      profile_idc == 138 || profile_idc == 139 || profile_idc == 134) {
-    // chroma_format_idc: ue(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&chroma_format_idc));
-    if (chroma_format_idc == 3) {
-      // separate_colour_plane_flag: u(1)
-      RETURN_FALSE_ON_FAIL(parser.ReadBits(&separate_colour_plane_flag, 1));
-    }
-    // bit_depth_luma_minus8: ue(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-    // bit_depth_chroma_minus8: ue(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-    // qpprime_y_zero_transform_bypass_flag: u(1)
-    RETURN_FALSE_ON_FAIL(parser.ConsumeBits(1));
-    // seq_scaling_matrix_present_flag: u(1)
-    uint32_t seq_scaling_matrix_present_flag;
-    RETURN_FALSE_ON_FAIL(parser.ReadBits(&seq_scaling_matrix_present_flag, 1));
-    if (seq_scaling_matrix_present_flag) {
-      // seq_scaling_list_present_flags. Either 8 or 12, depending on
-      // chroma_format_idc.
-      uint32_t seq_scaling_list_present_flags;
-      if (chroma_format_idc != 3) {
-        RETURN_FALSE_ON_FAIL(
-            parser.ReadBits(&seq_scaling_list_present_flags, 8));
-      } else {
-        RETURN_FALSE_ON_FAIL(
-            parser.ReadBits(&seq_scaling_list_present_flags, 12));
-      }
-      // We don't support reading the sequence scaling list, and we don't really
-      // see/use them in practice, so we'll just reject the full sps if we see
-      // any provided.
-      if (seq_scaling_list_present_flags > 0) {
-        LOG(LS_WARNING) << "SPS contains scaling lists, which are unsupported.";
-        return false;
-      }
-    }
-  }
-  // log2_max_frame_num_minus4: ue(v)
-  RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-  // pic_order_cnt_type: ue(v)
-  uint32_t pic_order_cnt_type;
-  RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&pic_order_cnt_type));
-  if (pic_order_cnt_type == 0) {
-    // log2_max_pic_order_cnt_lsb_minus4: ue(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-  } else if (pic_order_cnt_type == 1) {
-    // delta_pic_order_always_zero_flag: u(1)
-    RETURN_FALSE_ON_FAIL(parser.ConsumeBits(1));
-    // offset_for_non_ref_pic: se(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-    // offset_for_top_to_bottom_field: se(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-    // num_ref_frames_in_pic_order_cnt_cycle: ue(v)
-    uint32_t num_ref_frames_in_pic_order_cnt_cycle;
-    RETURN_FALSE_ON_FAIL(
-        parser.ReadExponentialGolomb(&num_ref_frames_in_pic_order_cnt_cycle));
-    for (size_t i = 0; i < num_ref_frames_in_pic_order_cnt_cycle; ++i) {
-      // offset_for_ref_frame[i]: se(v)
-      RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-    }
-  }
-  // max_num_ref_frames: ue(v)
-  RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&golomb_ignored));
-  // gaps_in_frame_num_value_allowed_flag: u(1)
-  RETURN_FALSE_ON_FAIL(parser.ConsumeBits(1));
-  //
-  // IMPORTANT ONES! Now we're getting to resolution. First we read the pic
-  // width/height in macroblocks (16x16), which gives us the base resolution,
-  // and then we continue on until we hit the frame crop offsets, which are used
-  // to signify resolutions that aren't multiples of 16.
-  //
-  // pic_width_in_mbs_minus1: ue(v)
-  uint32_t pic_width_in_mbs_minus1;
-  RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&pic_width_in_mbs_minus1));
-  // pic_height_in_map_units_minus1: ue(v)
-  uint32_t pic_height_in_map_units_minus1;
-  RETURN_FALSE_ON_FAIL(
-      parser.ReadExponentialGolomb(&pic_height_in_map_units_minus1));
-  // frame_mbs_only_flag: u(1)
-  uint32_t frame_mbs_only_flag;
-  RETURN_FALSE_ON_FAIL(parser.ReadBits(&frame_mbs_only_flag, 1));
-  if (!frame_mbs_only_flag) {
-    // mb_adaptive_frame_field_flag: u(1)
-    RETURN_FALSE_ON_FAIL(parser.ConsumeBits(1));
-  }
-  // direct_8x8_inference_flag: u(1)
-  RETURN_FALSE_ON_FAIL(parser.ConsumeBits(1));
-  //
-  // MORE IMPORTANT ONES! Now we're at the frame crop information.
-  //
-  // frame_cropping_flag: u(1)
-  uint32_t frame_cropping_flag;
-  uint32_t frame_crop_left_offset = 0;
-  uint32_t frame_crop_right_offset = 0;
-  uint32_t frame_crop_top_offset = 0;
-  uint32_t frame_crop_bottom_offset = 0;
-  RETURN_FALSE_ON_FAIL(parser.ReadBits(&frame_cropping_flag, 1));
-  if (frame_cropping_flag) {
-    // frame_crop_{left, right, top, bottom}_offset: ue(v)
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&frame_crop_left_offset));
-    RETURN_FALSE_ON_FAIL(
-        parser.ReadExponentialGolomb(&frame_crop_right_offset));
-    RETURN_FALSE_ON_FAIL(parser.ReadExponentialGolomb(&frame_crop_top_offset));
-    RETURN_FALSE_ON_FAIL(
-        parser.ReadExponentialGolomb(&frame_crop_bottom_offset));
-  }
-
-  // Far enough! We don't use the rest of the SPS.
-
-  // Start with the resolution determined by the pic_width/pic_height fields.
-  int width = 16 * (pic_width_in_mbs_minus1 + 1);
-  int height =
-      16 * (2 - frame_mbs_only_flag) * (pic_height_in_map_units_minus1 + 1);
-
-  // Figure out the crop units in pixels. That's based on the chroma format's
-  // sampling, which is indicated by chroma_format_idc.
-  if (separate_colour_plane_flag || chroma_format_idc == 0) {
-    frame_crop_bottom_offset *= (2 - frame_mbs_only_flag);
-    frame_crop_top_offset *= (2 - frame_mbs_only_flag);
-  } else if (!separate_colour_plane_flag && chroma_format_idc > 0) {
-    // Width multipliers for formats 1 (4:2:0) and 2 (4:2:2).
-    if (chroma_format_idc == 1 || chroma_format_idc == 2) {
-      frame_crop_left_offset *= 2;
-      frame_crop_right_offset *= 2;
-    }
-    // Height multipliers for format 1 (4:2:0).
-    if (chroma_format_idc == 1) {
-      frame_crop_top_offset *= 2;
-      frame_crop_bottom_offset *= 2;
-    }
-  }
-  // Subtract the crop for each dimension.
-  width -= (frame_crop_left_offset + frame_crop_right_offset);
-  height -= (frame_crop_top_offset + frame_crop_bottom_offset);
-
-  width_ = width;
-  height_ = height;
-  return true;
-}
-
-}  // namespace webrtc