Create local copy of Opus v1.1.2

webrtc/modules/audio_coding/codecs/opus/opus/src/silk/NLSF2A.c

Index: webrtc/modules/audio_coding/codecs/opus/opus/src/silk/NLSF2A.c
diff --git a/webrtc/modules/audio_coding/codecs/opus/opus/src/silk/NLSF2A.c b/webrtc/modules/audio_coding/codecs/opus/opus/src/silk/NLSF2A.c
new file mode 100644
index 0000000000000000000000000000000000000000..b1c559ea68213e06d39de79c977e86f573bd51c8
--- /dev/null
+++ b/webrtc/modules/audio_coding/codecs/opus/opus/src/silk/NLSF2A.c
@@ -0,0 +1,178 @@
+/***********************************************************************
+Copyright (c) 2006-2011, Skype Limited. All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+- Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+- Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+- Neither the name of Internet Society, IETF or IETF Trust, nor the
+names of specific contributors, may be used to endorse or promote
+products derived from this software without specific prior written
+permission.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+***********************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/* conversion between prediction filter coefficients and LSFs   */
+/* order should be even                                         */
+/* a piecewise linear approximation maps LSF <-> cos(LSF)       */
+/* therefore the result is not accurate LSFs, but the two       */
+/* functions are accurate inverses of each other                */
+
+#include "SigProc_FIX.h"
+#include "tables.h"
+
+#define QA      16
+
+/* helper function for NLSF2A(..) */
+static OPUS_INLINE void silk_NLSF2A_find_poly(
+    opus_int32          *out,      /* O    intermediate polynomial, QA [dd+1]        */
+    const opus_int32    *cLSF,     /* I    vector of interleaved 2*cos(LSFs), QA [d] */
+    opus_int            dd         /* I    polynomial order (= 1/2 * filter order)   */
+)
+{
+    opus_int   k, n;
+    opus_int32 ftmp;
+
+    out[0] = silk_LSHIFT( 1, QA );
+    out[1] = -cLSF[0];
+    for( k = 1; k < dd; k++ ) {
+        ftmp = cLSF[2*k];            /* QA*/
+        out[k+1] = silk_LSHIFT( out[k-1], 1 ) - (opus_int32)silk_RSHIFT_ROUND64( silk_SMULL( ftmp, out[k] ), QA );
+        for( n = k; n > 1; n-- ) {
+            out[n] += out[n-2] - (opus_int32)silk_RSHIFT_ROUND64( silk_SMULL( ftmp, out[n-1] ), QA );
+        }
+        out[1] -= ftmp;
+    }
+}
+
+/* compute whitening filter coefficients from normalized line spectral frequencies */
+void silk_NLSF2A(
+    opus_int16                  *a_Q12,             /* O    monic whitening filter coefficients in Q12,  [ d ]          */
+    const opus_int16            *NLSF,              /* I    normalized line spectral frequencies in Q15, [ d ]          */
+    const opus_int              d                   /* I    filter order (should be even)                               */
+)
+{
+    /* This ordering was found to maximize quality. It improves numerical accuracy of
+       silk_NLSF2A_find_poly() compared to "standard" ordering. */
+    static const unsigned char ordering16[16] = {
+      0, 15, 8, 7, 4, 11, 12, 3, 2, 13, 10, 5, 6, 9, 14, 1
+    };
+    static const unsigned char ordering10[10] = {
+      0, 9, 6, 3, 4, 5, 8, 1, 2, 7
+    };
+    const unsigned char *ordering;
+    opus_int   k, i, dd;
+    opus_int32 cos_LSF_QA[ SILK_MAX_ORDER_LPC ];
+    opus_int32 P[ SILK_MAX_ORDER_LPC / 2 + 1 ], Q[ SILK_MAX_ORDER_LPC / 2 + 1 ];
+    opus_int32 Ptmp, Qtmp, f_int, f_frac, cos_val, delta;
+    opus_int32 a32_QA1[ SILK_MAX_ORDER_LPC ];
+    opus_int32 maxabs, absval, idx=0, sc_Q16;
+
+    silk_assert( LSF_COS_TAB_SZ_FIX == 128 );
+    silk_assert( d==10||d==16 );
+
+    /* convert LSFs to 2*cos(LSF), using piecewise linear curve from table */
+    ordering = d == 16 ? ordering16 : ordering10;
+    for( k = 0; k < d; k++ ) {
+        silk_assert(NLSF[k] >= 0 );
+
+        /* f_int on a scale 0-127 (rounded down) */
+        f_int = silk_RSHIFT( NLSF[k], 15 - 7 );
+
+        /* f_frac, range: 0..255 */
+        f_frac = NLSF[k] - silk_LSHIFT( f_int, 15 - 7 );
+
+        silk_assert(f_int >= 0);
+        silk_assert(f_int < LSF_COS_TAB_SZ_FIX );
+
+        /* Read start and end value from table */
+        cos_val = silk_LSFCosTab_FIX_Q12[ f_int ];                /* Q12 */
+        delta   = silk_LSFCosTab_FIX_Q12[ f_int + 1 ] - cos_val;  /* Q12, with a range of 0..200 */
+
+        /* Linear interpolation */
+        cos_LSF_QA[ordering[k]] = silk_RSHIFT_ROUND( silk_LSHIFT( cos_val, 8 ) + silk_MUL( delta, f_frac ), 20 - QA ); /* QA */
+    }
+
+    dd = silk_RSHIFT( d, 1 );
+
+    /* generate even and odd polynomials using convolution */
+    silk_NLSF2A_find_poly( P, &cos_LSF_QA[ 0 ], dd );
+    silk_NLSF2A_find_poly( Q, &cos_LSF_QA[ 1 ], dd );
+
+    /* convert even and odd polynomials to opus_int32 Q12 filter coefs */
+    for( k = 0; k < dd; k++ ) {
+        Ptmp = P[ k+1 ] + P[ k ];
+        Qtmp = Q[ k+1 ] - Q[ k ];
+
+        /* the Ptmp and Qtmp values at this stage need to fit in int32 */
+        a32_QA1[ k ]     = -Qtmp - Ptmp;        /* QA+1 */
+        a32_QA1[ d-k-1 ] =  Qtmp - Ptmp;        /* QA+1 */
+    }
+
+    /* Limit the maximum absolute value of the prediction coefficients, so that they'll fit in int16 */
+    for( i = 0; i < 10; i++ ) {
+        /* Find maximum absolute value and its index */
+        maxabs = 0;
+        for( k = 0; k < d; k++ ) {
+            absval = silk_abs( a32_QA1[k] );
+            if( absval > maxabs ) {
+                maxabs = absval;
+                idx    = k;
+            }
+        }
+        maxabs = silk_RSHIFT_ROUND( maxabs, QA + 1 - 12 );                                          /* QA+1 -> Q12 */
+
+        if( maxabs > silk_int16_MAX ) {
+            /* Reduce magnitude of prediction coefficients */
+            maxabs = silk_min( maxabs, 163838 );  /* ( silk_int32_MAX >> 14 ) + silk_int16_MAX = 163838 */
+            sc_Q16 = SILK_FIX_CONST( 0.999, 16 ) - silk_DIV32( silk_LSHIFT( maxabs - silk_int16_MAX, 14 ),
+                                        silk_RSHIFT32( silk_MUL( maxabs, idx + 1), 2 ) );
+            silk_bwexpander_32( a32_QA1, d, sc_Q16 );
+        } else {
+            break;
+        }
+    }
+
+    if( i == 10 ) {
+        /* Reached the last iteration, clip the coefficients */
+        for( k = 0; k < d; k++ ) {
+            a_Q12[ k ] = (opus_int16)silk_SAT16( silk_RSHIFT_ROUND( a32_QA1[ k ], QA + 1 - 12 ) );  /* QA+1 -> Q12 */
+            a32_QA1[ k ] = silk_LSHIFT( (opus_int32)a_Q12[ k ], QA + 1 - 12 );
+        }
+    } else {
+        for( k = 0; k < d; k++ ) {
+            a_Q12[ k ] = (opus_int16)silk_RSHIFT_ROUND( a32_QA1[ k ], QA + 1 - 12 );                /* QA+1 -> Q12 */
+        }
+    }
+
+    for( i = 0; i < MAX_LPC_STABILIZE_ITERATIONS; i++ ) {
+        if( silk_LPC_inverse_pred_gain( a_Q12, d ) < SILK_FIX_CONST( 1.0 / MAX_PREDICTION_POWER_GAIN, 30 ) ) {
+            /* Prediction coefficients are (too close to) unstable; apply bandwidth expansion   */
+            /* on the unscaled coefficients, convert to Q12 and measure again                   */
+            silk_bwexpander_32( a32_QA1, d, 65536 - silk_LSHIFT( 2, i ) );
+            for( k = 0; k < d; k++ ) {
+                a_Q12[ k ] = (opus_int16)silk_RSHIFT_ROUND( a32_QA1[ k ], QA + 1 - 12 );            /* QA+1 -> Q12 */
+            }
+        } else {
+            break;
+        }
+    }
+}
+